pipeline construction

Mobile Subsea Services Limited is a specialized company formed to undertake stand alone, JV or sub contract projects within the oil & gas sector. Utilising our specialised personnel and partners we carry out every aspect of a contract with commitment and ensure on time completion. Each individual element of our partnership is able to perform with their own reliable and highly skilled managament staff and equipment.

These tasks include:

  1. Pre-construction survey

    Before construction begins, crews survey environmental features along proposed pipeline segments. Utility lines and agricultural drainages are located and marked to prevent accidental damage during pipeline construction. Next, the pipeline’s centerline and the exterior right of way boundaries are staked.

  2. Clearing and grading

    The pipeline right of way is cleared of vegetation. Temporary erosion control measures are installed prior to any earth-moving activities.

  3. Trenching

    Topsoil is removed from the work area and stockpiled separately in agricultural areas. Crews use backhoes or trenching machines to excavate a pipeline trench. The soil that is excavated during ditching operations is temporarily stockpiled on the non-working side of the trench.

  4. Pipe stringing

    Individual joints of pipe are strung along the right of way adjacent to the excavated ditch and arranged so they are accessible to construction personnel. A mechanical pipe-bending machine bends individual joints of pipe to the desired angle at locations where there are significant changes in the natural ground contours or where the pipeline route changes direction.

  5. Welding and coating pipe

    After the stringing and bending are complete, the pipe sections are aligned, welded together, and placed on temporary supports along the edge of the trench. All welds are then visually and radio graphically inspected. Line pipe, normally mill-coated or yard-coated prior to stringing, requires a coating at the welded joints. Prior to the final inspection, the entire pipeline coating is electronically inspected to locate and repair any coating faults or voids.

  6. Lowering pipe in and backfilling

    The pipe assembly is lowered into the trench by side-boom tractors. The trench is backfilled using a backfilling or bladed equipment; no foreign materials are permitted in the trench.

  7. Testing

    After backfilling, the pipeline is hydrostatically tested following federal regulations. Test water is obtained and disposed of in accordance with applicable federal, state and local regulations.

  8. Restoration

    Our policy is to clean up and restore the work area as soon as possible. After the pipeline is backfilled and tested, disturbed areas are restored as close as possible to their original contours. Restoration measures are maintained until the area is restored, as closely as possible, to its original condition.

Special Land Considerations

Projects are designed to minimize the impact to residential areas, as well as agricultural lands. Land disturbed during the construction period will be returned to as close to original condition as possible. Agricultural lands will be properly restored using approved, modern mitigation techniques designed to ensure full productive reuse of the agricultural lands.